User Manual Q&AAnswer
Jan 31, 2025 - 03:55 AM
To pair the SENA RC4 Remote Control with your Sena headset, please follow these steps:
1. Ensure that both the RC4 and your Sena headset are powered off.
2. Press and hold the Power button on the RC4 for about 5 seconds until the LED indicator starts flashing red and blue.
3. Turn on your Sena headset and put it into Bluetooth pairing mode according to the headset's user manual.
4. The RC4 will automatically enter pairing mode and start searching for nearby Bluetooth devices.
5. When the RC4 finds your Sena headset, it will announce the headset's name and the LED indicator will turn solid blue.
6. Press the Power button on the RC4 to confirm the pairing. The RC4 will announce "Pairing successful" and the LED indicator will turn off.
7. The RC4 is now paired with your Sena headset and ready to use.
Note: The RC4 supports Sena headsets with Bluetooth 4.1 or higher. Make sure your Sena headset meets this requirement for successful pairing.
For more detailed instructions and troubleshooting, please refer to the SENA RC4 Remote Control Instruction Manual.
Add New Comment