User Manual Q&AAnswer
Jan 31, 2025 - 03:53 AM
To adjust the sensitivity level on the DOG CARE AB01 Bark Collar for Dogs, please follow the steps below:
1. Ensure that the collar is turned off before making any adjustments.
2. Locate the sensitivity adjustment button on the front of the collar.
3. Press and hold the sensitivity adjustment button for about 5 seconds until the indicator light starts flashing.
4. Once the indicator light is flashing, you can release the button and the collar will enter the sensitivity adjustment mode.
5. To increase the sensitivity level, press the sensitivity adjustment button briefly. Each press will increase the sensitivity level by one.
6. To decrease the sensitivity level, press and hold the sensitivity adjustment button until the indicator light turns off, then release it. Press the button again briefly to decrease the sensitivity level by one.
7. After adjusting the sensitivity level, wait for about 10 seconds without any operation. The collar will automatically exit the sensitivity adjustment mode and save the new setting.
8. You can test the sensitivity level by simulating your dog's barking. If the collar is triggered too easily, repeat the above steps to decrease the sensitivity level. If the collar is not triggered when your dog barks, repeat the steps to increase the sensitivity level.
Please refer to page 6 of the DOG CARE AB01 Bark Collar for Dogs User Manual for visual instructions and additional information.
Add New Comment