User Manual Q&AAnswer
Jan 31, 2025 - 03:46 AM
Cleaning and maintaining your Avalon A4BLWTRCLR Bottom Loading Water Cooler Dispenser is essential to ensure its optimal performance and hygiene. Here is a step-by-step guide based on the instruction manual:
1. Unplug the water cooler dispenser from the power source before cleaning.
2. Remove the empty water bottle from the dispenser.
3. Clean the exterior of the dispenser using a soft, damp cloth and mild detergent. Avoid using abrasive cleaners or solvents.
4. To clean the water tanks and components, mix a solution of 1 tablespoon of bleach with 1 gallon of water.
5. Fill the empty water bottle with the bleach solution and place it on the dispenser.
6. Dispense the bleach solution through both the hot and cold water faucets until the bottle is empty. This will clean the internal water tanks and lines.
7. Remove the empty bleach bottle and rinse it thoroughly.
8. Fill the rinsed bottle with clean water and place it on the dispenser.
9. Dispense the clean water through both the hot and cold water faucets to flush out any remaining bleach solution.
10. Repeat the rinsing process with clean water at least two more times to ensure all traces of bleach are removed.
11. Wipe down the faucets and drip tray with a clean, damp cloth.
12. Plug the water cooler dispenser back into the power source.
Regular maintenance tips:
- Clean the drip tray regularly to prevent the buildup of dirt and bacteria.
- Replace the water bottle when empty to avoid contamination.
- Check the water level periodically and refill as needed.
- If the dispenser is not in use for an extended period, it is recommended to unplug it and drain any remaining water.
For more detailed instructions and safety precautions, please refer to the Avalon A4BLWTRCLR Bottom Loading Water Cooler Dispenser Instruction Manual provided in the link.
Add New Comment