User Manual Q&AAnswer
Jan 31, 2025 - 03:02 AM
To connect your RockJam RJ654 keyboard to your computer, you will need to follow these steps:
1. Make sure your computer is turned on and running.
2. Locate the USB cable that came with your keyboard. One end of the cable should have a USB Type A connector, which is a rectangular-shaped connector, and the other end should have a USB Type B connector, which is a square-shaped connector.
3. Plug the USB Type B connector into the USB Type B port on the back of your keyboard.
4. Plug the USB Type A connector into an available USB port on your computer.
5. Once the keyboard is connected to your computer, your computer should recognize it as a MIDI device. You may need to install drivers for your keyboard if prompted by your computer. You can download the drivers from the RockJam website or refer to the user manual for more information.
6. Once the drivers are installed, you can open your music software on your computer and select the RockJam RJ654 as the MIDI input device. Consult the user manual for your music software for specific instructions on how to do this.
7. You should now be able to use your RockJam RJ654 keyboard with your computer and music software. You can play and record MIDI data, use virtual instruments, and more.
Please note that the specific steps may vary depending on your computer's operating system and music software. It's always a good idea to consult the user manual for your keyboard and your music software for detailed instructions.
Add New Comment