User Manual Q&AAnswer
Jan 31, 2025 - 02:59 AM
To install the iGPSPORT SPD70 Dual Module Speed Sensor on your bicycle, follow these steps:
1. Place the speed sensor on the front hub of your bicycle.
2. Tighten the strap around the hub and hook the speed sensor securely.
3. After installing the SPD70, check to ensure that the sensor does not slip.
4. Make sure the sensor is functioning properly and can achieve static sleep and motion wake.
5. Keep the sensor at least one meter away from magnetic materials such as magnets.
For more detailed instructions, please refer to the user manual provided with the product.
Note: It is important to install the CR2025 button battery before using the speed sensor. The battery installation process is described in the manual.
Add New Comment