User Manual Q&AAnswer
Jan 31, 2025 - 02:44 AM
To connect the GARMIN IMWW PCB Module to your vehicle's infotainment system, you will need to follow these steps:
1. Ensure that your vehicle's infotainment system supports CAN communication and has a Bluetooth connection.
2. Locate the CAN bus connection in your vehicle. This is typically found in the dashboard or near the vehicle's ECU.
3. Connect the CAN bus wires from the GARMIN IMWW module to the corresponding CAN bus connection in your vehicle. Refer to the vehicle's wiring diagram or consult a professional if you are unsure about the connections.
4. Once the CAN bus connection is established, enable Bluetooth on your smartphone and pair it with the GARMIN IMWW module. Follow the instructions provided in your smartphone's Bluetooth settings to complete the pairing process.
5. Download and install the GARMIN smartphone app on your smartphone. This app will allow you to display navigation information on the infotainment system via Bluetooth.
6. Launch the GARMIN app on your smartphone and follow the on-screen instructions to configure the app and establish a connection with the GARMIN IMWW module.
7. Once the connection is established, you should be able to see infotainment vehicle data and navigation information from the smartphone app on your vehicle's infotainment system.
Please note that the above instructions are general guidelines and may vary depending on your specific vehicle model and infotainment system. It is always recommended to consult the user manual or contact the manufacturer for detailed instructions and support
Add New Comment