User Manual Q&AAnswer
Jan 31, 2025 - 02:41 AM
To configure the RAK7268 Gateway, you can log in to the WEB management page and follow these steps:
1. Connect your PC to the gateway's Wi-Fi network. The SSID is named "RAK7268_XXXX" (XXXX is the last two bytes of the gateway's MAC address) and does not require a password.
2. Open your preferred web browser and enter the gateway's IP address in the address bar. The default IP address is 192.168.230.1.
3. Enter the username and password to log in. The default username and password are both "root".
4. Once logged in, you can overview the status of your gateway and configure it using the web-based interface.
For more detailed information and step-by-step instructions, please refer to the "Configure the Gateway" section in the RAK7268 Gateway User Manual.
You can access the full user manual and additional documentation on the RAKwireless Documentation Center: https://doc.rakwireless.com/
If you need further technical support or have more questions, you can visit the RAKwireless Support Center: https://forum.rakwireless.com/ or contact RAKwireless via email at info@rakwireless.com.
Add New Comment