User Manual Q&AAnswer
Jan 31, 2025 - 02:22 AM
To connect the DYN-C-1000-DE Capacitive Accelerometer to a power supply, follow these steps:
1. Ensure that the power supply voltage is within the range of +6 to +20 VDC.
2. Identify the cable code/pin configuration:
- Red: V+ (Power supply voltage)
- Black: Ground (Power ground)
- X: Yellow (Signal +) - Positive analog output voltage signal for differential mode
- Blue: Signal (-) - Negative analog output voltage signal for differential mode
3. Connect the red cable to the positive terminal of the power supply.
4. Connect the black cable to the ground terminal of the power supply.
5. Do not connect the power supply and/or power ground to the yellow and/or blue cables.
6. Always use a clean power source and ensure that the voltage range is within the specified limits.
Please refer to the DYN-C-1000-DE Capacitive Accelerometer User Manual for more detailed instructions and safety precautions.
Add New Comment