User Manual Q&AAnswer
Jan 31, 2025 - 02:19 AM
To connect the KevinLAB KVL-C3-K01 LPWA System to power, follow these steps:
1. Prepare a 12V/1A adapter.
2. Plug the adapter into an AC outlet.
3. Connect the DC plug of the adapter to the "DC IN" port of the product.
4. Once the power connection is completed, the red LED on the top of the product will light up.
To connect a measuring instrument, follow these steps:
1. Prepare a measuring instrument.
2. Connect the measuring instrument to the product using a dedicated cable through the "METER" terminal.
The terminal descriptions are as follows:
- Left 3.5mm round terminal: "METER" - Used for external meter connection.
- Central 2.5mm round terminal: "UART" - Used for monitoring and setting.
- Round terminal in the right square: "DC-IN" - Used for power connection.
Please refer to the KevinLAB KVL-C3-K01 LPWA System User Manual for more detailed instructions and illustrations.
Add New Comment