User Manual Q&AAnswer
Jan 31, 2025 - 01:51 AM
To activate the GO Real-Time 4G/5G Tracker, follow these steps:
Step 1: Make sure you are using a unit that is current and not expired. The expiration date can be found on the box.
Step 2: Peel off the serial number label from the top of the device and place it on the manifest.
Step 3: Write the shipping information on the GO Real-Time 4G/5G Tracker.
Step 4: Pull the start tab on the GO Real-Time 4G/5G Tracker.
Step 5: The blue light will illuminate upon activation and will turn off during normal operation.
Step 6: Remove the adhesive strip on the back of the device and directly attach it to the packaging.
Note: Do not place the device in a protective sleeve if the humidity sensor is enabled.
After activation, shipment data will be available online. Go to Emerson.com/Oversight and enter the serial number of the device to view temperature and trip reports.
Add New Comment