User Manual Q&AAnswer
Jan 31, 2025 - 01:44 AM
To program the outlets to work with the remote control, please follow these steps:
1. Remove the outlet receiver from the power socket and then plug it back in.
2. Press and hold the "Learning & ON/OFF" button on the outlet receiver until the indicator starts to flash.
3. Release the "Learning & ON/OFF" button and press and hold the corresponding "ON" button on the remote control until you hear a "click".
4. The indicator on the outlet receiver will stop flashing, indicating that the pairing is successful.
Now, the outlet switch is programmed to respond to the remote control. You can use the remote control's on/off buttons to operate the outlet switch.
Please note that the outlets are pre-programmed for immediate use, but you can customize the configuration to meet your needs by following these programming steps.
Add New Comment