User Manual Q&AAnswer
Jan 31, 2025 - 01:41 AM
To connect the Trimble EM130 Empower Module to a device, follow these steps:
1. Ensure that your device is compatible with the EM130 Empower Module. The module operates on the Wi-Fi 802.11ah frequency band (902-928MHz).
2. Make sure that the module is properly installed and configured according to the instructions provided in the user manual.
3. Connect the module to your device using the I/O module connector. The connector allows for hot-swapping and is user-replaceable.
4. If you need to charge the module or provide DC power, use the standard charger/DC power-in port or the POGO port.
5. Once the module is connected, you can establish a Wi-Fi connection between your device and the module. Refer to your device's user manual for instructions on how to connect to a Wi-Fi network.
Please note that the above instructions are a general guide. For detailed information and specific instructions, please refer to the Trimble EM130 Empower Module User Guide.
Add New Comment