Answer

Jan 31, 2025 - 01:34 AM
To install and set up the HIKVISION DS-K7SP01 Series Keyfob Receiving Kit, please follow the steps below:
1. Safety Precautions:
- Ensure compliance with electrical safety regulations.
- Do not connect multiple devices to one power adapter.
- If there is any smoke, odors, or noise coming from the device, turn off the power immediately and contact the service center.
- Keep the battery away from children and do not ingest it.
- Dispose of used batteries according to the instructions provided.
2. Mounting and Placement:
- Avoid physical shock and high electromagnetic radiation.
- Do not place the device in extremely hot, cold, dusty, or damp locations.
- Keep the device away from direct sunlight, low ventilation, heat sources, rain, and moisture.
- Clean the device with a soft and dry cloth, avoiding alkaline detergents.
3. Security Considerations:
- Biometric recognition products may not be 100% applicable to anti-spoofing environments.
- Use multiple authentication modes for higher security levels.
- The serial port is for debugging purposes only.
4. Wall Mounting:
- Install the equipment securely according to the instructions in the manual.
- Follow the installation instructions to prevent injury.
5. Battery Replacement:
- Improper use or replacement of the battery may result in an explosion.
- Replace the battery with the same or equivalent type only.
- Dispose of used batteries according to the instructions provided by the battery manufacturer.
6. Regulatory Information:
- FCC compliance: The equipment complies with the limits for a Class B digital device.
- Follow FCC conditions to avoid harmful interference.
- The product complies with applicable European standards and directives.
Please refer to the complete user manual for detailed instructions, illustrations, and any additional information specific to your HIKVISION DS-K7SP01 Series Keyfob Receiving Kit.
Add New Comment