User Manual Q&AAnswer
Jan 31, 2025 - 01:28 AM
To measure AC current with the UNI-T UT219E-M-DS Professional Clamp Meter, follow these steps:
1. Set the rotary switch to the "A~" position.
2. Press and hold the trigger to open the jaws of the clamp meter.
3. Clamp the jaws around the conductor through which you want to measure the AC current.
4. Release the trigger slowly until the jaws are fully closed.
5. Read the True Root Mean Square (RMS) and frequency values of the AC current directly from the display.
Note: Make sure to position the conductor to be tested at the center of the jaws to ensure accurate measurements. Only measure one current conductor at a time to avoid erroneous readings.
Add New Comment