User Manual Q&AAnswer
Jan 31, 2025 - 01:10 AM
To reset the BrosTrend AC1200 Dual Band WiFi Extender, you can follow these steps:
1. Locate the reset button on the extender. It is usually located on the side or back of the device.
2. Use a paperclip or a small pin to press and hold the reset button for about 10 seconds.
3. Release the reset button after 10 seconds.
4. The extender will restart and all settings will be restored to factory defaults.
Note: Resetting the extender will erase all previous configurations and settings. You will need to set it up again using one of the methods mentioned in the installation guide.
For more detailed instructions and troubleshooting, you can refer to the complete installation guide and setup manual provided by BrosTrend.
Add New Comment