User Manual Q&AAnswer
Jan 31, 2025 - 01:08 AM
To properly measure your blood pressure using the Activ8rlives Blood Pressure3 Connected Monitor, follow these steps:
1. Sit down and relax for 5 minutes before each measurement.
2. Sit in a chair with your feet flat on the floor and legs uncrossed. Rest your arms on a table in front of you so that the device is level with your heart.
3. Remove any clothing on your upper arm so that the cuff can be placed on bare skin.
4. Place the cuff on your upper arm, ensuring that it is secured within the "OK" region and the air hose runs down the inside of your arm.
5. The bottom of the cuff should be 1-2 cm (about 1 or 2 fingers) above the bend in your arm.
6. Secure the cuff firmly together at the Velcro patches to prevent it from slipping during measurement.
7. Keep still for the duration of the measurement. Avoid moving, talking, eating, drinking, or any other activity that may produce errors.
8. Press the START/STOP button to begin the measurement. The cuff will start inflating and the device will detect pressure oscillations to determine your blood pressure and pulse rate.
9. Once the measurement is complete, the results will be displayed on the LCD screen.
10. If you need to take another measurement, completely deflate the cuff and wait for 5 minutes before repeating the process.
It is important to note that blood pressure can fluctuate throughout the day, so try to take your measurements at the same time each day for consistent results. Also, make sure to follow any additional instructions provided by your medical team regarding medication timing and measurement frequency.
Add New Comment