User Manual Q&AAnswer
Jan 31, 2025 - 12:26 AM
To adjust the flow rate of the OCTO OP-2 Pulse Wave Pump, you can use the controller that comes with the pump. Here are the steps to adjust the flow rate:
1. Make sure the pump is properly installed and connected to the controller.
2. Press the "Settings" button on the controller to enter the settings menu.
3. Use the arrow buttons ( ) to navigate to the flow rate settings.
4. Press the "Confirm" button ( ) to select the flow rate settings.
5. Use the arrow buttons ( ) to increase or decrease the flow rate as desired.
6. Press the "Confirm" button ( ) to save the new flow rate setting.
7. You can also choose from the pre-programmed flow patterns by navigating to the wave patterns settings in the settings menu.
Please refer to the OCTO OP-2 Pulse Wave Pump Instruction Manual for more detailed instructions and illustrations on adjusting the flow rate and using the controller.
Add New Comment