User Manual Q&AAnswer
Jan 30, 2025 - 10:21 PM
To install the TERI 800 Built-In Manicure Dust Collector with a HEPA filter, follow these steps:
1. Cut a 165x195mm hole in the table, according to the provided diagram. It is recommended to place the hole in front of the manicure master, considering the table's model and the number and sizes of cabinets.
2. Cover the edges of the hole to hide the ends of the chipboard.
3. Attach the top mesh to the table by centering the hole. Mark the spots for mounting bolts with a pencil. Remove the top mesh and drill four holes (5mm) through.
4. Place the top mesh on the holes above and the dust collector below. Insert the supplied mounting bolts into the holes. Secure the dust collector with the xxxx -nuts from below. Ensure that the dust collector is fitted with a filter facing the master, and the rotation regulator is positioned to the right of the master.
Congratulations! The dust collector is now ready to use.
Note: For more detailed instructions and diagrams, please refer to the TERI 800 Built-In Manicure Dust Collector user manual.
Add New Comment