User Manual Q&AAnswer
Jan 30, 2025 - 10:18 PM
To clean the HEPA filter in the TERI 800 Portable Nail Dust Collector, follow these steps:
1. Pull out the filter from the dust collector.
2. Shake the filter gently over a wet sink to remove the dust.
3. Rinse the filter with water.
4. Optionally, you can treat the filter with a disinfectant solution.
5. Thoroughly dry the filter before reinserting it into the dust collector.
6. Do not heat the filter above 90 degrees Celsius.
It is recommended to clean the filter after each customer. However, if the filter's efficiency is significantly reduced, it should be replaced. Teri™ recommends replacing the filters once a month. You can purchase replacement filters from your Teri dealer.
Please note that improper cleaning or maintenance of the filter may result in reduced performance or damage to the dust collector.
Add New Comment