User Manual Q&AAnswer
Jan 30, 2025 - 10:17 PM
To install the ROBE PATT 2013 EU Products Lighting fixture, follow these steps:
1. Rig the fixture to the truss or fasten it to the floor stand using the mounting yoke. Use a 12.2 mm diameter hole in the yoke to xxxx it to the clamp or spigot. Ensure that the fixture is securely installed without the possibility of tilting.
2. For overhead installation, always secure the PATT 2013 to the truss using a safety wire that can hold at least 10 times the weight of the fixture. Fasten the safety wire to the truss and around the mounting yoke of the PATT 2013.
3. Install a cord cap on the power cable to allow connection to power outlets. Install a grounding-type (earthed) plug following the plug manufacturer's instructions.
Please refer to the user manual for more detailed instructions and safety precautions.
Note: It is important to consult a qualified professional or technician for the installation process to ensure proper setup and safety.
Add New Comment