User Manual Q&AAnswer
Jan 30, 2025 - 10:01 PM
To reverse the door on the HELLER H91F 91L Bar Freezer, follow these steps:
1. Ensure the unit is unplugged and empty.
2. Tilt the unit backwards and rest it on something solid to prevent it from slipping during the door reversing process.
3. Remove all parts that need to be removed for the door to be taken off, and store them for re-installation later.
4. Do not lay the unit flat as this may damage the coolant system.
5. It is recommended to have two people handle the unit during assembly.
6. Remove the two screws positioned at the rear side of the top cover.
7. Remove the top cover and thermostat xxxx and set them aside.
8. Unscrew the top hinge and remove the door, placing it on a soft surface to prevent scratches and damage.
9. Unscrew the bottom hinge and remove the adjustable feet from both sides.
10. Refit the bracket belonging to the bottom hinge pin and replace both adjustable feet.
11. Place the door back on, ensuring it is aligned horizontally and vertically so that the seals are properly closed on all sides before tightening the top hinge.
12. Return the top cover to its original position and fix it with the screws that were previously removed.
13. Fix the thermostat xxxx back in place.
Please refer to the instruction manual for more detailed instructions and illustrations.
Add New Comment