User Manual Q&AAnswer
Jan 30, 2025 - 09:34 PM
To install the HAMPTON BAY SMA030EKTDG18D Jackson Park 22 Inch 3-Light Brushed Nickel Integrated LED Bathroom Vanity Light Bar, please follow the instructions below:
1. Before starting the installation, make sure to shut off power at the circuit breaker or fuse panel to ensure safety.
2. Remove the existing light fixture from the wall.
3. Attach the mounting plate included with the light bar to the electrical box in the wall using the provided screws.
4. Connect the wires from the electrical box to the corresponding wires on the light bar. Make sure to match the colors (black to black, white to white, and green or bare copper to the ground).
5. Secure the light bar to the mounting plate using the provided screws.
6. Install the light shades onto the light bar by twisting them into place.
7. Turn on the power at the circuit breaker or fuse panel and test the light bar to ensure it is working properly.
For more detailed instructions and diagrams, please refer to the user guide provided with the product.
Note: It is always recommended to consult a licensed electrician if you are unsure about any part of the installation process.
Add New Comment