User Manual Q&AAnswer
Jan 30, 2025 - 09:27 PM
To install the LUTRON LHD0-96W24V-U HomeWorks Digital 3-Wire Voltage LED Controller, please follow these steps:
1. Ensure that you have the required components, including a compatible Lutron control, at least one HomeWorks Digital 0.1% Controller, and at least one compatible LED load (light engine). Make sure the load ratings match the controller output ratings.
2. Mount the controller by removing the top cover to access the multi-sided mounting key holes. Choose the appropriate mounting option as shown in the installation guide.
3. Wire the controller by removing the top cover to access the terminal blocks. Open necessary knockouts to pass wires into the wiring compartment. Connect the necessary wires according to the provided illustration. For HD1 / HD2 wiring, refer to Application Note #142 on the Lutron website. Optional - An AC line cord may be used for a 120 V~ application, but 277 V~ applications must be hard-wired. Optional - Add a barrier between non-Class 2 and Class 2 wires if required.
4. Rotate the Field Adjustment xxxx to the full counter-clockwise position.
5. Ensure that compatible dimmers and loads are installed and restore power to the circuit.
For more detailed instructions and troubleshooting information, please refer to the LUTRON LHD0-96W24V-U HomeWorks Digital 3-Wire Voltage LED Controller Installation Guide. If you need further assistance, you can visit the Lutron website or contact Lutron Customer Assistance at 1.844.LUTRON1 (1.844.588.7661).
Add New Comment