User Manual Q&AAnswer
Jan 30, 2025 - 09:24 PM
To connect the Eurolite SB-1100B Power Distributor to the mains, follow these steps:
1. Ensure that the device is disconnected from the power supply before starting the installation.
2. Connect the device to the mains using the provided CEE plug.
3. Make sure to connect the earth wire properly.
4. If the device will be directly connected to the local power supply network, include a disconnection switch with a minimum opening of 3 mm at every pole in the permanent electrical installation.
Please note that the installation should be approved by an expert before taking it into operation for the first time.
Add New Comment