User Manual Q&AAnswer
Jan 30, 2025 - 09:10 PM
To connect the TEN-4 speaker kit, follow these steps:
1. Plug the GP3-R throat mic (A) into the throat mic adapter (B) using the DIN connectors (G). Make sure to align the arrow indicators before firmly pressing them together to avoid bending the pins.
2. Plug the 3.5mm headphone connector (H) of the throat mic adapter into the Microphone Port (5) of the speaker.
3. Turn on the speaker by following the instructions in the "Using the TEN-4 speaker" section of the manual.
4. Adjust the neck strap of the throat mic for tightness using the adjusters (E). The throat mic should be snug but not tight around your neck.
Please refer to the manual for visual references and additional information on wearing and adjusting the throat mic for optimal performance.
Add New Comment