User Manual Q&AAnswer
Jan 30, 2025 - 08:56 PM
To change the rotor on the NEUATION TECHNOLOGIES iFUGE 192610VET Benchtop Centrifuge, follow these steps:
1. Ensure that the centrifuge is turned off and unplugged from the power source.
2. Locate the rotor on the central shaft of the motor. The rotor is held in place by magnets.
3. Gently pull the current rotor out of the groove on the rotor adapter.
4. Align the new rotor with the central shaft and gently guide it into the groove on the rotor adapter until it snaps into place.
5. Ensure that the new rotor is securely attached to the central shaft.
6. Once the new rotor is properly installed, you can proceed with using the centrifuge as instructed in the user manual.
Please refer to the "CHANGING THE ROTOR" section in the user manual for more detailed instructions and illustrations.
Add New Comment