User Manual Q&AAnswer
Jan 30, 2025 - 08:19 PM
To install and set up the TP-Link TL-POE2406 PoE Power Injector for the TP-Link Omada Outdoor Access Point EAP110-Outdoor, please follow the steps below:
1. Connect the TL-POE2406 PoE Power Injector to a power source using the provided power cord.
2. Connect one end of an Ethernet cable to the LAN port of the TL-POE2406 PoE Power Injector.
3. Connect the other end of the Ethernet cable to the LAN port of the EAP110-Outdoor Access Point.
4. Connect another Ethernet cable to the PoE port of the TL-POE2406 PoE Power Injector.
5. Connect the other end of the Ethernet cable to the WAN port of a router or switch.
6. Make sure all connections are secure.
7. Power on the TL-POE2406 PoE Power Injector and the EAP110-Outdoor Access Point.
The TL-POE2406 PoE Power Injector will provide power to the EAP110-Outdoor Access Point through the Ethernet cable, eliminating the need for a separate power adapter for the access point.
Please refer to the user manual for more detailed instructions and troubleshooting information.
Add New Comment