User Manual Q&AAnswer
Jan 30, 2025 - 08:12 PM
To set the output voltage on the Time Electronics 1010 DC Voltage Calibrator, follow these steps:
1. Power on the 1010 by toggling the power switch.
2. Check the battery level indicator to ensure the batteries are charged. If the indicator is red, the batteries need recharging.
3. Select the desired output voltage range using the 5-position rotary switch.
4. Set the output voltage using the 5-digit thumbwheel switch. The resolution of the setting is 0.01% of full scale.
5. Set the output polarity using the change-over toggle switch. The center position provides a short circuit on the output.
6. Connect the output terminals to the device or circuit you want to calibrate or measure.
Please refer to the Time Electronics 1010 DC Voltage Calibrator User Manual for more detailed instructions and specifications.
Add New Comment