User Manual Q&AAnswer
Jan 30, 2025 - 05:48 AM
To pair your Banshee with the remote control, please follow these steps:
1. Make sure your Banshee is turned on and the green signal light is on.
2. Place the remote control close to your Banshee.
3. Start with the remote control off. While holding the top trigger button and the figure-eight flight button at the same time, press the on/off button to turn the remote control on. The signal light on the remote control will turn green.
4. Your Banshee's signal light should start flashing, indicating that the pairing was successful.
5. If the pairing fails, please repeat the previous steps.
By following these steps, you should be able to pair your Banshee with the remote control and make the wings flap when you press the top trigger button.
Add New Comment