User Manual Q&AAnswer
Jan 30, 2025 - 05:43 AM
To clean your K-VIT MIR002 LED Mirror, follow these steps:
1. Use a soft piece of cloth to remove any dust from the mirror surface. Gently wipe all surfaces of the mirror to ensure it is free from any loose particles.
2. Spray a small amount of non-abrasive soap or alcohol onto the mirror surface. Be careful not to use excessive amounts, as this can accelerate the corrosion of the back cover.
3. Using another soft piece of cloth, gently clean the mirror surface in a circular motion. Ensure that all areas are thoroughly cleaned.
4. Before the alcohol vaporizes, make sure to dry the mirror with a dry cloth. This will prevent any streaks or water spots from forming.
Note: It is important to use non-abrasive soaps with a neutral pH or recommended glass cleaning products. Avoid using non-cleaning mirror chemicals and excessive amounts of soap or alcohol, as these can damage the mirror.
For further assistance or if you encounter any issues, please refer to the warranty information provided with your mirror and contact your nearest distributor.
Add New Comment