User Manual Q&AAnswer
Jan 30, 2025 - 05:41 AM
To switch between different modes on the Inland KB21 Mechanical Numpad, you can use the following key combinations:
1. Bluetooth Mode: Press and hold the FN key, then press the 1, 2, or 3 key to switch to Bluetooth mode. The corresponding key light will flash quickly during pairing and flash slowly when reconnecting. Once the connection is successful, the 1-key light will stay on for 2 seconds and then return to the overall backlight effect.
2. 2.4G Mode: Press and hold the FN key, then press the 4 key to switch to 2.4G mode. The 4-key light indicator will flash quickly during code pairing and flash slowly when reconnecting. After the connection is successful, the 4-key light will stay on for 2 seconds and then return to the overall backlight effect.
3. Wired Mode: Simply connect the USB-C cable to the numpad and your computer to use it in wired mode. No key combination is required.
Please note that if the pairing process takes longer than 1 minute, the numpad will automatically enter sleep mode. If the connection is not successful within 20 seconds when reconnecting, it will also enter sleep mode.
Add New Comment