User Manual Q&AAnswer
Jan 30, 2025 - 05:39 AM
To connect the ecler VEO-SPH42 HDMI distribution amplifier/splitter, follow these steps:
1. Connect your HDMI signal source (e.g., PC, Blu-ray player) to the HDMI input port of the VEO-SPH42.
2. Connect the HDMI output ports of the VEO-SPH42 to your displays (TVs, monitors, projectors, etc.).
3. Power up the VEO-SPH42, displays, and signal sources.
Please note that the HDCP version is prioritized over EDID settings. If your source is HDCP 2.2 compliant, the 4K@60Hz EDID settings will only be accepted if your displays are also HDCP 2.2 compliant. Otherwise, the output will automatically be set to 1080p@60Hz.
For a visual representation of the connection setup, you can refer to the application diagram provided in the user manual.
It is important to read the manual thoroughly and understand its contents to ensure optimal operation and performance of the VEO-SPH42 HDMI distribution amplifier/splitter.
Add New Comment