User Manual Q&AAnswer
Jan 30, 2025 - 05:36 AM
To change the color temperature (CCT) and power settings on the UltraLux LITH6018CCT LED Industrial Light, follow these steps:
1. CCT Selection: The light fixture has a tri-color CCT selectable feature, allowing you to choose between 3000K, 4000K, or 6500K light. To change the CCT, locate the switch on the PCB (printed circuit board) of the fixture. Switching the position of the switch will select the desired CCT.
2. Power Selection: The light fixture also has power selectable options. To change the power settings, locate the DIP (Dual In-line Package) switch on the driver. The DIP switch has two pins, labeled as PIN1 and PIN2. The positions of these pins determine the power output.
- PIN1: The position of PIN1 determines the first power option.
- PIN2: The position of PIN2 determines the second power option.
Refer to the provided table in the installation guide to select the desired power output by switching the positions of PIN1 and PIN2.
Please note that installation and any activities related to connection to the power supply should be performed by a registered electrician. It is important to read the instructions before mounting the fixture and ensure that the power supply is switched off before any work is done.
Add New Comment