User Manual Q&AAnswer
Jan 30, 2025 - 05:30 AM
To install and wire the HIKVISION 48 Series AX Hybrid Pro Control Panel, follow these steps:
1. Power down the control panel before wiring accessories and peripherals.
2. Mount the back case of the control panel.
3. Fix the telephone module (sold separately) and wire it according to the instructions.
4. Fix the GPRS/4G module (sold separately) and wire it according to the instructions.
5. Wire the power supply and network connections.
- Power Supply Wiring: Connect the power supply wires to the designated terminals on the control panel.
- Network Wiring: Connect the network cable to the LAN port on the control panel.
- Peripherals Wiring: Wire the peripherals (such as detectors) according to the specified resistors and wiring methods mentioned in the manual.
6. Wire the telephone module according to the instructions.
7. Close the case of the control panel.
For more detailed information and illustrations, please refer to the "Installation and Wiring" section in the HIKVISION 48 Series AX Hybrid Pro Control Panel User Guide.
Note: It is always recommended to consult a professional or a trained technician for proper installation and wiring to ensure safety and optimal performance.
Add New Comment