User Manual Q&AAnswer
Jan 30, 2025 - 05:18 AM
To pair the SONOFF POWR316 Smart Power Meter Switch with the eWelink App, you can follow these steps:
1. Power on the device. The Wi-Fi LED indicator will start flashing in a cycle of two short flashes and one long flash.
2. Download and install the eWelink App on your smartphone.
3. Open the eWelink App and tap on the "+" icon to add a new device.
4. Select "Bluetooth Pairing" as the pairing method.
5. Follow the prompts on the App to complete the pairing process.
6. Alternatively, you can also scan the QR code on the back of the device to add it to the eWelink App.
7. Once the device is successfully paired, the Wi-Fi LED indicator will stay on.
Please note that if the device is not paired within 3 minutes, it will exit the Bluetooth Pairing Mode. In that case, you can long-press the device button for about 5 seconds until the Wi-Fi LED indicator changes to the pairing mode again.
For more detailed instructions and troubleshooting tips, please refer to the SONOFF POWR316 Smart Power Meter Switch User Manual.
Add New Comment