User Manual Q&AAnswer
Jan 30, 2025 - 04:54 AM
Installation of the sg 623173 Bassi E27 PIR Sensor should be carried out by an authorized electrician. However, here is a general guide on how to install the sensor:
1. Ensure that the power supply is turned off before starting the installation process.
2. Remove the existing light bulb from the E27 socket.
3. xxxx the sg 623173 Bassi E27 PIR Sensor into the E27 socket, just like you would with a regular light bulb.
4. Once the sensor is securely screwed in, you can then install the light bulb into the sensor.
5. Adjust the sensor's detection range and sensitivity according to your preferences. This can usually be done using the adjustment dials or switches located on the sensor itself.
6. Connect the sensor to the power supply. Make sure to follow the wiring instructions provided in the product manual or consult with an authorized electrician for proper electrical connections.
7. Turn on the power supply and test the sensor by moving within its detection range. The sensor should activate the connected light bulb when motion is detected.
Please note that the above instructions are general guidelines, and it is important to refer to the specific installation guide provided with the sg 623173 Bassi E27 PIR Sensor for detailed instructions and safety precautions.
Add New Comment