User Manual Q&AAnswer
Jan 30, 2025 - 04:53 AM
To ignite the burners on the , follow these steps:
1. Press down and turn the xxxx for the burner you want to use.
2. Keep the xxxx strongly pressed in for approximately 1 second to allow the ignitor to light the gas and the thermocouple to heat up.
3. Release the xxxx after approximately 1 second.
4. The flame can be adjusted by turning the xxxx anti-clockwise until it reaches the desired size.
5. To turn off the burner, push down and rotate the xxxx to the 'Off' position.
Note: If the burner does not light within 12-15 seconds, turn the control xxxx back to the 'Off' position and wait for 1 minute before attempting re-ignition. Make sure the cooktop is connected to electricity, the gas is turned on, and the electrodes are sparking. Also, ensure that all burner caps are placed correctly on the burner rings.
For more detailed instructions and safety information, please refer to the Eurolux ECG95X 5 Burner Gas Cooktops Instruction Manual.
Add New Comment