User Manual Q&AAnswer
Jan 30, 2025 - 04:40 AM
To charge the lithium battery for your AVATAR NFCBA01 Wireless Remote Controller, follow these steps:
1. Open the Banshee battery compartment cover and disconnect the black & red wire from the main wire terminal.
2. Remove the exhausted lithium battery from the compartment.
3. Connect the exhausted lithium battery to the USB charger.
4. Connect the charger to an adaptor, computer, or any DC5.OV USB charging port.
5. The green light on the charger indicates that the power is working, and the red light indicates that the battery is charging.
6. When charging is complete, the red light on the charger will turn off.
7. Unplug the USB charger from the power source and promptly remove the fully charged lithium battery.
8. Connect the fully charged lithium battery wire terminal with the main terminal in the battery compartment.
9. Close the battery compartment.
Please note that the charging time for the lithium battery is around 20 minutes, and the flight duration is around 8 minutes. Make sure to use only the customized rechargeable lithium battery that comes with your Banshee and follow the instructions provided in the user manual.
Add New Comment