How do I properly insert and use the ARROW EU-25041-HP Pressure Injectable One-Lumen PICC? (Arrow EU-25041-HP Injectable One-Lumen PICC Instruction Manual)

Answer

manuals.plus

Jan 30, 2025 - 04:34 AM

The is a medical device used for intravenous access. Here is a step-by-step guide on how to insert and use the PICC, based on the information provided in the instruction manual:

1. Preparing for insertion:
- Ensure that you have read and understood all the warnings, precautions, and instructions in the instruction manual.
- Verify that there are no contraindications for using the Pressure Injectable PICC in the patient.
- Gather all the necessary components listed in the manual.

2. Inserting the PICC:
- Cleanse the insertion site using an appropriate antiseptic solution and allow it to dry.
- Use the provided tourniquet to apply gentle pressure above the insertion site to enhance vein visibility.
- Insert the echogenic 21 Ga. introducer needle into the vein using the Seldinger technique.
- Advance the spring-wire guide through the needle and into the vein.
- Remove the needle while holding the guide in place.

3. Advancing the catheter:
- Slide the GlideThru™ Peel-Away Sheath over the guide and advance it until the tip is just beyond the insertion site.
- Peel away the sheath, leaving the dilator in place.
- Advance the catheter over the dilator until the desired length is reached.
- Remove the dilator and guide wire.

4. Securing the catheter:
- Use the provided GRIP-LOK®1 Catheter Fixation Device to secure the catheter to the patient's skin.
- Attach the MicroCLAVE®2 Neutral Displacement Connector to the catheter's T-Port Connector.

5. Flushing and using the PICC:
- Use the provided 10 mL Luer-Lock syringe to flush the catheter with an appropriate solution.
- Follow the recommended flushing protocol and frequency as per your healthcare facility's guidelines.
- Connect the necessary infusion or injection devices to the MicroCLAVE®2 connector for medication administration or fluid infusion.

Please note that this is a general overview of the insertion and usage process. It is crucial to refer to the complete instruction manual for detailed instructions, specific precautions, and any additional information provided by the manufacturer.