User Manual Q&AAnswer
Jan 30, 2025 - 04:29 AM
To mount the Power Dynamics BD80T In-Outdoor IP66 Speaker, follow these steps:
1. Unscrew both bolts that secure the bracket to the speaker.
2. Attach the bracket to a suitable surface.
3. xxxx both undone bolts back in, securing the speaker to the bracket.
4. Pull off the left side rear cover to expose the connector terminal. Connect the speaker to the output of the amplifier (Black = negative pole / Red = positive pole). Make sure the audio system is turned off before making any connection.
5. Pull off the right side rear cover to expose the rotary selection switch. Adjust the rotary switch to 70V/100V or 8Ω position (for directly operating the speaker at a low-impedance amplifier output). When connecting several speakers, make sure that all speakers have the same polarity and that the amplifier is not overloaded.
Please refer to the back of the manual for detailed illustrations on how to mount the speaker.
Add New Comment