User Manual Q&AAnswer
Jan 30, 2025 - 04:20 AM
To change the drill bit on the SEALEY CP20VDD 20V Ø13mm Hammer Drill, follow these steps:
1. Ensure that the drill is turned off and the battery is removed for safety.
2. Open the chuck by rotating it counterclockwise.
3. Insert the desired drill bit into the chuck, making sure it is centered and fully inserted.
4. Tighten the chuck by rotating it clockwise until the drill bit is securely held in place.
5. Double-check that the drill bit is properly tightened by giving it a gentle tug.
6. You can now proceed to use the drill with the new drill bit.
Note: Always ensure that the drill bit is compatible with the chuck size (Ø13mm) and the type of material you will be drilling. Refer to the drill bit manufacturer's instructions for specific usage guidelines.
Add New Comment