User Manual Q&AAnswer
Jan 30, 2025 - 04:12 AM
To set the date and time on the Medisana BU 510 Blood Pressure Monitor, follow these steps:
1. Press the SET button when the device is powered off.
2. The screen will display "USER". Press the MEM button to switch between "USER 1" and "USER 2".
3. Press the SET button to confirm the user.
4. The year setting will start flashing. Use the MEM button to adjust the year to the correct value.
5. Press the SET button to confirm the year. The display will then switch to the month and date setting mode.
6. The month will start flashing. Use the MEM button to adjust the month to the correct value.
7. Press the SET button to confirm the month. The display will then proceed to the date setting.
8. Like the month setting, use the MEM button to adjust the day to the correct value.
9. Press the SET button to confirm the date. The display will then switch to the time setting mode.
10. The hour will start flashing. Use the MEM button to adjust the hour to the correct value.
11. Press the SET button to confirm the hour. Proceed in the same way to set the minutes.
12. After setting the time, "CL" will appear on the display, indicating that the setup mode can be exited by pressing the SET button.
13. If the batteries are changed, the date and time will need to be set again.
Please refer to the Medisana BU 510 Blood Pressure Monitor Instruction Manual for more detailed instructions and illustrations.
Add New Comment