User Manual Q&AAnswer
Jan 30, 2025 - 04:11 AM
To clean the brush roll on the Bissell Crosswave Pet Vacuum, you can follow these steps:
1. Ensure that the machine is turned off and unplugged before attempting to clean the brush roll.
2. Remove the dirty water tank from the machine and set it aside.
3. Locate the brush roll window on the bottom of the machine. It is the clear window that allows you to see the brush roll.
4. Press the release button on the brush roll window to open it. This will allow you to access the brush roll.
5. Carefully lift the brush roll out of the machine by pulling it up and away from the machine.
6. Rinse the brush roll under warm water to remove any dirt, debris, or pet hair. You can also use a soft brush or cloth to gently scrub the brush roll if needed.
7. After cleaning the brush roll, ensure that it is completely dry before reinserting it back into the machine. You can let it air dry or use a clean cloth to dry it.
8. Once the brush roll is dry, align it with the brush roll window and insert it back into the machine. Make sure it is securely in place.
9. Close the brush roll window by pressing it down until it clicks into place.
10. Reattach the dirty water tank to the machine and ensure that it is properly secured.
Your Bissell Crosswave Pet Vacuum's brush roll should now be clean and ready for use.
Add New Comment