User Manual Q&AAnswer
Jan 30, 2025 - 03:54 AM
To charge your device using the ANKER PowerCore III 10K Wireless Power Bank, please follow these steps:
1. Ensure that the power bank has enough battery power by checking the LED indicator lights on the front of the power bank. Each light represents approximately 25% battery capacity.
2. If needed, charge the power bank using the included USB-C cable and a wall charger. Connect the USB-C cable to the power bank's USB-C input port and the other end to a compatible wall charger. The LED indicator lights will flash to indicate charging and turn solid when fully charged.
3. Once the power bank is charged, you can charge your device wirelessly or using a cable.
- Wireless Charging: Place your Qi-enabled device (e.g., smartphone) on top of the power bank's wireless charging surface. Ensure that the device is properly aligned with the charging coil on the power bank. The LED indicator lights will turn on to indicate charging. Please note that wireless charging may be slower than wired charging.
- Wired Charging: Connect your device to the power bank using a compatible charging cable. The power bank has a USB-A output port and a USB-C output port, so use the appropriate cable for your device. The LED indicator lights will turn on to indicate charging.
4. Monitor the LED indicator lights on the power bank to check the remaining battery capacity. Each light represents approximately 25% battery capacity. When all lights are off, it indicates that the power bank is fully discharged and needs to be recharged.
If you have any further questions or encounter any issues, please refer to the ANKER PowerCore III 10K Wireless Power Bank user manual or contact ANKER customer support using the provided contact information.
Add New Comment