User Manual Q&AAnswer
Jan 30, 2025 - 03:41 AM
To install the eurotech lighting BSP05 Spotlight on Spike, please follow these steps:
1. Make sure the power is turned off before starting the installation.
2. Connect the head of the fitting to the spike and insert the spike into the ground securely.
3. Connect the cables to your remote driver using an IP rated connector, paying attention to the live (+) and neutral (-) markings.
- Blue cable should be connected to the negative (-) terminal.
- Brown cable should be connected to the positive (+) terminal.
4. Ensure that the installation is correct before switching on the fitting to test.
Please note that all installations must be carried out by a qualified electrician following local regulations. It is important to read and follow the installation instructions and safety instructions provided in the manual.
For more detailed specifications and information, you can visit the eurotechlighting.co.nz website.
Remember to always prioritize safety and consult a professional if you have any doubts or concerns during the installation process.
Add New Comment