User Manual Q&AAnswer
Jan 30, 2025 - 03:32 AM
To pair the LEDWOOD LD-I9W-TWS 5.0 Wireless Stereo Earphones with your device, please follow these steps:
1. Open the charging bin and the two headphones will automatically match. Note: The headphones are pre-matched at the factory, but if they don't automatically match, put them back in the charging bin for 5 seconds before removing them for automatic matching.
2. On your phone, go to the settings menu and select "Wireless".
3. Look for the product name "TWS-I9W" in the list of available devices and click on it to connect.
4. Once connected, you will hear a voice prompt saying "Connection success" and the left and right headphones will emit a hint tone.
Please note that if you want to use the right earphone alone, you need to remove the right earphone from the charging bin and keep the left earphone in the charging bin. Wait for 2 minutes for the phone to search for the right ear device name "TWS-I9W".
If you encounter any issues with the pairing process, make sure that your earphones are fully charged, in the boot state, and that the headphones and your device are within 15 meters of each other without any barriers in between. If the headphones still don't connect, try dropping the wireless connection on your phone, charge the headphones in the charging bin for 10 seconds, and then take them out. When the red and blue lights of the other headphone flash, it means the pairing is successful and you can try connecting again.
For more detailed instructions and troubleshooting tips, please refer to the LEDWOOD LD-I9W-TWS 5.0 Wireless Stereo Earphones User Manual.
Add New Comment