User Manual Q&AAnswer
Jan 30, 2025 - 03:18 AM
To assemble the WORKER 23524 Kid's Multifunctional Balance Bike, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. SCOOTER ASSEMBLY:
- Press the button on both sides of the seat and lift the seat frame.
- Insert the handles into the frame and adjust the height using the holes.
- Turn the xxxx so that the arrow points to the two wheels on the frame.
- The two arrows on the rear wheel frame indicate the direction of the rear wheels.
- There is a foot brake on the rear wheel.
2. SCOOTER TRICYCLE ASSEMBLY:
- Press the rear wheel frame to rotate it outwards.
- Press the rear wheel button and turn it outwards.
- Turn the castors to position 2 on both sides.
- Press the button on the joint between the main frame and the rear wheel frame to join the wheel frames.
- The rear wheel frames are in position 2.
- There is a foot brake on the rear wheels.
3. BALANCE BIKE TRICYCLE ASSEMBLY:
- Remove the handlebars by pressing the knobs on the frame.
- Press the xxxx on both sides of the frame and push the seat down.
- Slide the handlebars into the frame and turn the knobs on the wheel frame so that the arrow points to the three wheels.
4. BALANCE BIKE ASSEMBLY:
- Press the button on the rear frame and slide the wheel frame outwards.
- Press the xxxx on the castors and slide the castors inwards.
- Place the wheels in position 1.
- Press the button on the frame between the main frame and the castor frame to join the frames together.
5. PEDAL TRICYCLE ASSEMBLY:
- The pedals are located on the underside of the seat. Raise the seat for better access.
- To attach the pedals, press the button on the front wheel. Repeat for both sides.
- Press the button between the main frame and the rear wheel frame to slide the frame to position 3.
- Press the button on the rear wheel and set the wheel to position 3.
Please refer to the user manual for detailed illustrations and additional information on each assembly step.
Add New Comment