Answer

Jan 30, 2025 - 02:58 AM
.
To install a cutting bit on the BORMANN PRO BRT6000 Wood Trimmer, follow these steps:
1. Release and remove the transparent guard by opening the locking lever.
2. Press the spindle lock button and slowly rotate the spindle by hand until it locks in place.
3. Use the included wrench to loosen the lock nut on the end of the spindle.
4. Insert the cutter into the spindle collet. Note that the speed of the cutter for this trimmer should not be less than 33000rpm.
5. Tighten the lock nut to secure the cutter in the spindle. Do not over-tighten.
6. Reattach the transparent guard.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment