User Manual Q&AAnswer
Jan 30, 2025 - 02:54 AM
To program the BFt CLONIX1-2 Rolling-Code with Cloning Radio Control System, follow these steps:
1. Press the SW1 key once. The LED will start flashing.
2. Press and hold the hidden key until the LED of the receiver stays on.
3. Press the T1 key. The LED will flash quickly to indicate successful memorization.
4. Wait for the LED to switch off.
5. Press the SW2 key once. The LED will start flashing.
6. Press and hold the hidden key until the LED of the receiver stays on.
7. Press the T2 key. The LED will flash quickly to indicate successful memorization.
8. Wait for the LED to switch off.
Please note that these instructions are for basic programming. For more advanced programming options, refer to the instruction manual or consult the Universal palmtop programmer instructions and the CLONIX Programming Guide.
It is important to read the instruction manual carefully for safety, installation, operation, and maintenance information. If you have any further questions or need assistance, please refer to the manual or contact qualified personnel.
Add New Comment