User Manual Q&AAnswer
Jan 30, 2025 - 02:52 AM
To assemble and set up the Steinbach Solardusche Deluxe Solar Shower, follow these steps:
1. Prepare the setup location: Choose a sturdy, level, waterproof, and slip-proof floor or use the optional Steinbach outdoor floor element. Ensure there is access to a water supply and drain, as well as sufficient solar radiation.
2. Anchor the shower: With the help of a second person, position the shower at the desired location and secure it to prevent toppling. Mark the drilling points through the holes in the base of the shower.
3. Drill holes and insert attachment materials: Detach the shower from the base and use an electric drill to create suitable holes for the chosen attachment materials (e.g., wall anchors). Insert the attachment materials into the holes to prepare the setup location.
4. Assemble the solar shower: Place the sealing ring into the opening at the top of the tank. Use an Allen wrench and the attachment screws to xxxx the shower head onto the tank. xxxx the hose adapter onto the hose connection. Place the O-ring on the drain cap and xxxx the drain cap into the tank.
5. Set up the solar shower: Position the solar shower at the prepared setup location, ensuring it is pointing in the correct direction. While a second person supports the shower, xxxx the base of the shower into the floor using the appropriate attachment materials.
6. Fill the tank: Connect a garden hose to the hose adapter and the faucet of the water pipe. Turn on the water supply faucet and turn the shower faucet all the way to the "hot" position. Allow the tank to fill, which takes approximately 3 minutes. Once water consistently runs out of the shower head, close the shower faucet and turn off the water supply faucet.
Now your Steinbach Solardusche Deluxe Solar Shower is assembled, set up, and ready for use. Please refer to the manual for further details and safety instructions.
Add New Comment